Success flash icon

Error flash icon

datum-IMU

datum-IMU

Single-unit price: $39.99 + shipping

Campaign ends when minimum unit count is reached

Backers icon

Backers: 3

Target icon campaign show

Target: 20

Funded icon show

Funded: 12

Product Details

Name

datum-IMU

Brand / Manufacturer

J&J Studios

Manufacturer Part #

JJ-DTM-002-01

Product Description

alt text datum-IMU

URI command syntax. JSON encapsulated data packets.

The ideal IMU for your next IoT or robotics project.


  • datum
    1. a piece of information
    2. a fixed starting point of a scale or operation
  • inertia
    1. a property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force

features

  • Atmel SAMD21G18 microcontroller
  • ST Microelectronics LSM9DS1 IMU
  • Onboard EEPROM settings storage
  • URI style command interface
  • JSON formatted data packets
  • Globally unique 64 bit UUID
  • UF2 Bootloader
  • Mounting holes in all four corners
  • 1.0” x 1.75” (25.4 mm x 44.4 mm)

The datum-IMU sensor combines the same SAMD21G18 microcontroller used on the Arduino Zero with the LSM9DS1 IMU sensor from ST Microelectronics to create the simplest, easiest to use IMU sensor for your application.

The datum-IMU sensor emulates a serial port over a USB connection, presents the information and data stored on it in a JSON formatted packet, and processes URI style commands to change and retrieve its settings. The datum-IMU sensor fills the gap between a LEGO® Mindstorms® sensor and a breakout board.

Control the behavior of the sensor by using URI style commands right from your favorite terminal program. Want to set the report rate to 10 Hz and send the reports automatically? The following command does just that.

set /config?reportRate=10&automaticReporting=true

Not sure what the settings for the datum-IMU sensor were? The following command will retrieve them in a JSON formatted data packet.

get /sensor/config

{
  "accelerometer": {
    "enabled": true,
    "units": "g",
    "range": "2 g",
    "filterType": "mean",
    "sampleRate": 50,
    "dataRate": 10
  },
  "gyro": {
    "enabled": true,
    "units": "dps",
    "range": "245 dps",
    "filterType": "mean",
    "sampleRate": 59.5,
    "dataRate": 10
  },
  "magnetometer": {
    "enabled": true,
    "units": "G",
    "range": "4 G",
    "filterType": "mean",
    "sampleRate": 40,
    "dataRate": 10
  }
}

The data from the datum-IMU sensor is also encapsulated in a JSON formatted packet. This results in human readable text that is still easy to parse with your favorite programming language. An example of the output is shown below.

{
  "timestamp": 4310.4,
  "accelerometer": {
    "t": [4310.248, 4310.351],
    "x": [-0.141296, -0.141052],
    "y": [-0.035767, -0.03595],
    "z": [-0.971252, -0.970093]
  },
  "gyro": {
    "t": [4310.248, 4310.351],
    "x": [-1.001892, -1.05423],
    "y": [-0.800018, -0.829926],
    "z": [0.216827, 0.194397]
  },
  "magnetometer": {
    "t": [4310.247, 4310.346],
    "x": [0.116455, 0.116943],
    "y": [-0.253906, -0.257324],
    "z": [0.782715, 0.781494]
  }
}

The datum-IMU sensor can do much more than just collect the data. The measurement units can be customized to suit your application. IMU data can be returned in g, G, dps, counts, or m/s^2 . The datum-IMU sensor does all the calculations for you.

It can also apply filters such as min, mix, mean, and RMS to the data stream. This truly makes the datum-IMU sensor a smart sensor that goes far beyond what a breakout board can do. The datum-IMU sensor is also programmed with an Arduino compatible bootloader allowing full customization of the firmware.

alt text alt text

The datum-IMU sensor is just one of the sensors in the datum line currently available. The other sensors, datum-Weather, datum-Light, and datum-IMU all feature the same easy to use, text based interface. More information on the full spectrum of sensors is available here.

Why GroupGets?

J&J Studios is focused on making it easier for students and hobbyists to integrate sensors into their projects. For someone new to electronics a breadboard, jumper wires, breakout boards, and header pins can be intimidating. Many people are already familiar with a URI syntax for getting and setting parameters and receiving data in JSON encapsulated packets. Therefore our products focus on translating the language a sensor speaks into that more familiar format. J&J Studios is breaking the barrier between a LEGO® Mindstorms® sensor and a breakout board.


Purchase Information

Unit Deliverable

One unit of the datum-IMU sensor.

Unit Price

$39.99

Campaign Part #

GG-P-573

Availability

Campaign active, ends when minimum unit count reached

Factory Lead Time

7 Days

Shipping Details

GroupGets will handle the shipment of orders for this product.

  • Avatar
    JandJstudios

    I have just created the GroupGet for datum-IMU!

Featured Campaigns