Loading...Please wait one moment.

This campaign is no longer active, but has been archived.

LoFive R1

LoFive R1
Funded
0 of 1
LoFive R1
122% Funded
50
Goal
61 of 50
Backed

$24.99 + Shipping
Ending Date: Mon, 20 May 2019 13:00:00 PDT

Product Details

Brand / Manufacturer

QWERTY Embedded Design

Manufacturer Part #

LoFive-R1

Product Description

The new LoFive R1 features the latest SiFive FE310-G002 RISC-V MCU. This new G002 version of the FE310 adds an I2C port and a second UART over its predecessor, which makes it much easier to add sensor and peripheral interfaces. The PCB has been updated as well. It now has castellated edges in case you want to drop it on another board via SMT instead of through-hole. If the first LoFive was a little too "wild west" for you, LoFive R1 is a much friendlier introduction to the RISC-V ecosystem that seems to be growing in popularity on a daily basis.

 

Want to know more? Check out our Q&A with the LoFive designer on Hackster.io.

 

Castellated Edges

Castellated Edges

 

Specifications

  • MCU – SiFive Freedom E310 (FE310-G002) 32-bit RV32IMAC processor @ up to 320+ MHz (1.61 DMIPS/MHz)
  • 16 KB RAM
  • Storage - 128-Mbit SPI flash (ISSI IS25LP128)
  • Expansion - 2x 14-pin headers with JTAG, GPIO, PWM, SPI, I2C, UART, 5V, 3.3V and GND
  • Misc - 1x reset button, 16 MHz crystal
  • Power Supply - 5V via pin 1 on header; Operating Voltage: 3.3 V and 1.8 V
  • Dimensions - 38 x 18 mm (estimated)
  • License - CERN Open Hardware License v1.2

 

Production castellated PCBs will be provided by PCBway

 

Resources

LoFive R1 Quarter View


Purchase Information

Unit Deliverable

One LoFive R1

Unit Price

$24.99

Availability

Not available / campaign Funded, end date: Mon, 20 May 2019 13:00:00 PDT

Lead Time

30 Days after campaign end date


Options and Add-Ons

No Image Available

FTDI Breakout - FTDI FT2232H-56Q MINI MDL

$30.00

FTDI Breakout used for programming the LoFive.

Image of TDI FT2232H-56Q MINI MDL

No Image Available

Premium Female/Male 'Extension' Jumper Wires - 20 x 3" (7.62cm)

$3.50

20x3" (7.62cm) Female to Male Jumper Wires.

Female to Male Jumper Wire Image

No Image Available

Premium Male/Male Jumper Wires - 20 x 3" (7.62cm)

$3.50

20x3" (7.62cm) Male to Male Jumper Wires.

Male to Male Jumper Wire Image

No Image Available

Premium Female/Female Jumper Wires - 20 x 3" (7.62cm)

$3.50

20x3" (7.62cm) Female to Female Jumper Wires.

Female to Female Jumper Wire Image

No Image Available

Full sized breadboard

$8.50

This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. The back is made of foam double-sided tape, if you remove the protective paper you can attach it to a flat clean surface.

Breadboard Image

No Image Available

Diffused RGB 5mm LED (25 pack)

$15.25

Diffused 5mm tri-color LEDs with separate red, green and blue LED chips inside!

  • Pack of 25 diffused RGB LEDs
  • 5mm diameter
  • Red: 630 nm wavelength, Green: 525 nm, Blue: 460 nm
  • Red: 1.9-2.3V Forward Voltage, at 20mA current, Green: 3.0-3.4V, Blue: 3.0-3.4V
  • Red: 3000 mcd typical brightness, Green: 5000 mcd, Blue: 900 mcd

LED Image

No Image Available

Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25

$1.25

Resistor Image

Sponsors

Sponsor the great works of our community of developers and conservation technologists who are trying to make a real difference. Contact us at sponsor@groupgets.com for more information about becoming a campaign sponsor. For help or any other questions, please submit a support ticket here.

Help

Do you have questions before you back this campaign? We would love to answer them for you! You can either Contact Us or join in on the discussion.

Approved

We are proud to support LoFive R1 in reaching its goal.

Trusted

GroupGets is a trusted platform, enabling companies and makers to effortlessly sell their products and making technology accessible to all.

Featured Campaigns

LoFive R1

MistySOM

Funded

GroupGet

Funded
108%

Target
12

Price
$277.00

Built around the Renesas RZ family of microprocessors, MistySOM enables efficient and flexible development of embedded compute applications. Ruggedized for industrial tem... View Campaign
LoFive R1

gCore

Funded

GroupGet

Funded
113%

Target
15

Price
$99.00

The gCore is a high-end ESP32 development board designed to be a platform for portable graphics and GUI-based designs. It was designed by Dan Julio to scratch his own itch... View Campaign
LoFive R1

gCore (round 2)

Funded

GroupGet

Funded
100%

Target
5

Price
$99.00

The gCore is a high-end ESP32 development board designed to be a platform for portable graphics and GUI-based designs. It was designed by Dan Julio to scratch his own itch... View Campaign