This is a voltage level shifter/translator. It is capable of connecting the SPI/I2C communication buses or digital signals with different voltage standards. I.e. you can connect the 5V logic Arduino to 3.3V/1.8V logic sensors or to connect 3V3 IO of Digilent Analog Discovery to 1.8V/5V sensors. This board has 8 bidirectional digital channels, SOT23-5 LDO voltage regulator for low side voltage and LEDs indicating supply voltages (low and high voltage).
Voltage regulator can be used as power supply for connected sensor.
Permitted voltage difference between devices is limited by equation (VREF_B - VREF_A)>= 1V. Where VREF_B is external supply voltage, VREF_A is the LDO regulator voltage.
Table 1. Choosing the LDO voltage.
This board have an optional RA and RB 0402 pull-up resistors. More one choosing proper value of the pull-up resistors can be found in NVT2008 Datasheet. We assemble 1k Ohm RB resistors for you.
Low Voltage LDO regulator
This RT-NVT2008 has assembled fixed voltage regulator in the SOT23-5 package depend on your choise. You can switch freely LDOs according to table 1.
Example of using the RT-NVT2008.
- Voltage shifter with selected LDO (check accessory)
- Max. output current: 150mA
- Optional 1k resistors for RB1...8 (Check options)
- Holes for 2.54 pin headers (CA,CB)
- Holes for ~AWG26 wires
Product page: robothings.pl