Loading...Please wait one moment.

This campaign is no longer active, but has been archived.

LoFive RISC-V

LoFive RISC-V
Funded
0 of 1
LoFive RISC-V
257% Funded
100
Goal
257 of 100
Backed
743 of 1000 units are still available
$25.00 + Shipping
Ending Date: Sat, 07 Oct 2017 16:59:00 PDT

Product Details

Brand / Manufacturer

QWERTY Embedded Design, LLC

Product Description

LoFive is a lightweight SiFive Freedom E310 open source SoC evaluation kit. The E310 leverages the Free and Open RISC-V Instruction Set Architecture originally developed by UC Berkeley and now has wide industry support via the [RISC-V Foundation](https://riscv.org/#). Don't let the board's understated name and openness fool you - this MCU packs some impressive specs and the board was designed by the prolific QWERTY Embedded Design founder, Michael Welling. ![LoFive LED GIF](https://groupgets-files.s3.amazonaws.com/LoFive/LoFive_LED.gif) **Schematics** [![LowFive Schematics](https://groupgets-files.s3.amazonaws.com/LoFive/LoFive-Schematics-600px.png)](https://groupgets-files.s3.amazonaws.com/LoFive/LoFive-Schematics.png) (click to open a larger image) **Specifications** * MCU – SiFive Freedom E310 (FE310) 32-bit RV32IMAC processor @ up to 320+ MHz (1.61 DMIPS/MHz) * Storage - 128-Mbit SPI flash (ISSI IS25LP128) * Expansion - 2x 14-pin headers with JTAG, GPIO, PWM, SPI, UART, 5V, 3.3V and GND * Misc - 1x reset button, 16 MHz crystal * Power Supply - 5V via pin 1 on header; Operating Voltage: 3.3 V and 1.8 V * Dimensions - 38 x 18 mm (estimated) * License - CERN Open Hardware Licence v1.2 **Resources** * [Github](https://github.com/mwelling/lofive) **Blog Posts** * [Hackaday](https://hackaday.com/2017/09/18/a-smaller-cheaper-risc-v-board/) ![Back Render](https://groupgets-files.s3.amazonaws.com/LoFive/back_render.png)

Purchase Information

Unit Deliverable

1 LoFive

Unit Price

$25.00

Availability

Not available / campaign Funded, end date: Sat, 07 Oct 2017 16:59:00 PDT

Lead Time

3-5 weeks after close of campaign. Days after campaign end date


Options and Add-Ons

No Image Available

FTDI Breakout - FTDI FT2232H-56Q MINI MDL

$30.78

FTDI Breakout used for programming the LoFive. ![Image of TDI FT2232H-56Q MINI MDL](https://groupgets-files.s3.amazonaws.com/LoFive/FT2232H-56Q_MINI%20MDL.PNG)

No Image Available

Premium Female/Male 'Extension' Jumper Wires - 20 x 3" (7.62cm)

$3.50

20x3" (7.62cm) Female to Male Jumper Wires. ![Female to Male Jumper Wire Image](https://groupgets-files.s3.amazonaws.com/LoFive/lf1.jpg)

No Image Available

Premium Male/Male Jumper Wires - 20 x 3" (7.62cm)

$3.50

20x3" (7.62cm) Male to Male Jumper Wires. ![Male to Male Jumper Wire Image](https://groupgets-files.s3.amazonaws.com/LoFive/lf2.jpg)

No Image Available

Premium Female/Female Jumper Wires - 20 x 3" (7.62cm)

$3.50

20x3" (7.62cm) Female to Female Jumper Wires. ![Female to Female Jumper Wire Image](https://groupgets-files.s3.amazonaws.com/LoFive/lf3.jpg)

No Image Available

Full sized breadboard

$8.50

This is a 'full-size' breadboard, 830 tie points. Good for small and medium projects. It's 2.2" x 7" (5.5 cm x 17 cm) with a standard double-strip in the middle and two power rails on both sides. The back is made of foam double-sided tape, if you remove the protective paper you can attach it to a flat clean surface. ![Breadboard Image](https://groupgets-files.s3.amazonaws.com/LoFive/lf4.jpg)

No Image Available

Diffused RGB 5mm LED (25 pack)

$15.25

Diffused 5mm tri-color LEDs with separate red, green and blue LED chips inside! * Pack of 25 diffused RGB LEDs * 5mm diameter * Red: 630 nm wavelength, Green: 525 nm, Blue: 460 nm * Red: 1.9-2.3V Forward Voltage, at 20mA current, Green: 3.0-3.4V, Blue: 3.0-3.4V * Red: 3000 mcd typical brightness, Green: 5000 mcd, Blue: 900 mcd ![LED Image](https://groupgets-files.s3.amazonaws.com/LoFive/lf5.jpg)

No Image Available

Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25

$1.25

![Resistor Image](https://groupgets-files.s3.amazonaws.com/LoFive/lf6.jpg)

Sponsors

Sponsor the great works of our community of developers and conservation technologists who are trying to make a real difference. Contact us at sponsor@groupgets.com for more information about becoming a campaign sponsor. For help or any other questions, please submit a support ticket here.

Help

Do you have questions before you back this campaign? We would love to answer them for you! You can either Contact Us or join in on the discussion.

Approved

We are proud to support LoFive RISC-V in reaching its goal.

Trusted

GroupGets is a trusted platform, enabling companies and makers to effortlessly sell their products and making technology accessible to all.

Featured Campaigns

LoFive RISC-V

MistySOM

Funded

GroupGet

Funded
108%

Target
12

Price
$277.00

Built around the Renesas RZ family of microprocessors, MistySOM enables efficient and flexible development of embedded compute applications. Ruggedized for industrial tem... View Campaign
LoFive RISC-V

gCore

Funded

GroupGet

Funded
113%

Target
15

Price
$99.00

The gCore is a high-end ESP32 development board designed to be a platform for portable graphics and GUI-based designs. It was designed by Dan Julio to scratch his own itch... View Campaign
LoFive RISC-V

gCore (round 2)

Funded

GroupGet

Funded
100%

Target
5

Price
$99.00

The gCore is a high-end ESP32 development board designed to be a platform for portable graphics and GUI-based designs. It was designed by Dan Julio to scratch his own itch... View Campaign