Audiomoth Dev + GPS Bundle
.jpg)
.jpg)
Product Details
Brand / Manufacturer
Open Acoustic Devices
Manufacturer Part #
AUDIOMOTH-DEV-GPS-1.0.1
Product Description
The AudioMoth Dev and GPS bundle has everything needed to start using GPS time signals to set the internal AudioMoth clock and to synchronize recordings. The standard AudioMoth firmware will use the GPS to set the AudioMoth clock before each recording period. The alternative AudioMoth-GPS-Sync firmware allows recordings to be synchronized to better than one microsecond
Included in the bundle
- Audiomoth Dev
- AudioMoth GPS Board
- 2 pin and 4 pin JST-PH jumper cables to connect the two boards
.jpg)
GPS Board Features
- Time setting from GPS (PA1616S)
- 33 tracking/ 66 acquisition-channel GPS receiver
- GPS Consumption current(@3.3V):
- Acquisition: 25mA Typical
- Tracking: 20mA Typical
- Delayed start with magnetic reed switch
- Start and stop recording with magnet (ideal for controlling the device when inside an enclosure)
- Module datasheet: https://www.cdtop-tech.com/products/pa1616s
- Application notes:
- GitHub - Using The Audiomoth GPS Board
- Github - Using AudioMoth GPS Sync
AudioMoth Dev Features
- Silicon Labs Wonder Gecko microcontroller
- 48MHz 32-bit processor
- DSP instruction support and floating-point unit
- 256kB Flash
- 32kB RAM plus an extra 256kB of external SRAM
- On-board analog MEMS microphone, Sensitivity -38 dBV/Pa, 63 dBA SNR, 10Hz to 192kHz
- Sample rates up to 384kHz
- 3.5 mm jack socket for external electret condenser microphones
- Micro-USB B port for power, configuration and for reprogramming the Flash
- 5 separate JST-PH style headers for board-board/board-case integration
- 2-pin JST-PH header for connecting external power supplies (3.3V to 6V)
- 2-pin JST-PH header for powering external 3V boards or products from AudioMoth Dev – 3pin JST-PH header for external red and green LED’s
- 3-pin JST-PH header for an external switch
- 4-pin JST-PH header for multi-function 3V General Purpose I/O (GPIO)
- 6-pin serial wire debug port
- MicroSD card connector
- Datasheet: GitHub - Audiomoth Dev Datasheet
Notes
- Orders will be shipping around March 1st 2024, once shipped you will receive an automatic email with your tracking information.
- This Group Buy campaign ends on February 23rd 2024
- Your order may be charged while the GroupGet campaign is live and active.
- No batteries or battery holder included
- All versions of AudioMoth firmware and apps are compatible with all hardware versions.
- The AudioMoth GPS Board and AudioMoth Dev bundle is not compatible with the AudioMoth IPX7 Case.
- International Duties and Taxes are not included, you may be required to pay these before delivery.
Export Information
- AudioMoth Dev, HTSUS: 8519.81.25.00, Country of Origin: China, ECCN: EAR99
- AudioMoth GPS Board, HTSUS: 8517.62.0090, Country of Origin: China ECCN: 7A994
Links
Purchase Information
Unit Deliverable
One AudioMoth Dev 1.0.1, one AudioMoth GPS 'S' Board, and one of each 2 pin and 4 pin JST-PH jumper cables
Unit Price
$149.99
Availability
Campaign Funded, ends when minimum unit count reached
Lead Time
7 Days after campaign end date
Options and Add-Ons
64GB Micro SD Card
$18.00
This SD card has been validated by Open Acoustic Devices to deliver the highest quality recording and best compatibility with AudioMoth Dev (card model determined by available supply).
SanDisk Extreme® microSDHC™ UHS-I w/adapter- 64GB
SanDisk Extreme Pro® microSDHC™ UHS-I w/adapter- 64GB
USB A to Micro B Charge & Sync Cable
$2.50
300.0 mm (0.98') Micro USB Cable
AudioMoth USB Microphone and Case (Green)
$84.99
The AudioMoth USB Microphone and Case (Green) together make a splashproof and easy-to-use full-spectrum USB microphone. The device streams audible and ultrasonic frequencies via USB and is designed to specifically run using the free AudioMoth Live App and using the AudioMoth USB Microphone firmware. It uses an identical audio front-end to the standard AudioMoth 1.2.0 variants and doesn’t require batteries. It also has a 3.5mm socket to allow additional external electret condenser (PIP) microphones/hydrophones to be used. The case is made from injection-molded polycarbonate and the acoustic path is protected using a splashproof Gore acoustic vent. The case has an easy-accessible switch and a large loop to take strain off of the USB cable or to make it easy to attach to objects during use.
Latest AudioMoth USB Microphone GroupGets campaign - https://groupgets.com/usbmoth
Sponsors
Sponsor the great works of our community of developers and conservation technologists who are trying to make a real difference. Contact us at sponsor@groupgets.com for more information about becoming a campaign sponsor. For help or any other questions, please submit a support ticket here.
Help
Do you have questions before you back this campaign? We would love to answer them for you! You can either Contact Us or join in on the discussion.
Approved
We are proud to support Audiomoth Dev + GPS Bundle in reaching its goal.
Trusted
GroupGets is a trusted platform, enabling companies and makers to effortlessly sell their products and making technology accessible to all.