Loading...Please wait one moment.

Teledyne FLIR Lepton FS

Lepton FS is a non-radiometric 160 x 120 resolution micro thermal
Teledyne FLIR Lepton FS
Teledyne FLIR Lepton FS
Active
0 of 2
Teledyne FLIR Lepton FS Teledyne FLIR Lepton FS
40% Funded
5
Goal
2 of 5
Backed

Ending Date: Mon, 06 Feb 2023 14:35:30 PST

Product Details

Name

Teledyne FLIR Lepton FS

Brand / Manufacturer

Teledyne FLIR

Manufacturer Part #

500-0771-FS1

Product Description

Lepton FS is a non-radiometric 160 x 120 resolution micro thermal camera module with reduced thermal sensitivity, reduced scene dynamic range, and up to 3% inoperable pixels but the lowest price ever for a factory Lepton. These units balance performance and price, enabling monitoring applications where radiometry is not required and pixel-level image information is less important than broad thermal data. With the lowest cost per pixel in the Lepton family, low power consumption, and simple integration, Lepton FS provides integrators an appropriate thermal capability for innovative thermal monitoring products in smart building automation, security, occupancy sensing, and more.

Just as we were the first place to get FLIR Lepton seven years ago, we are bringing this new Lepton to you first at a highly compelling price to make your thermal imaging application more economically viable. To celebrate, all accessory boards below are 10% off excluding the new tCam-mini Wi-Fi board.

 

160 x 120 RESOLUTION NON-RADIOMETRIC MICRO THERMAL CAMERA

COMMON INTERFACES AND FACTORY SUPPORT TO SHORTEN TIME TO MARKET

Standard Lepton mechanical interface, electrical interface, and US-based Technical Services team.

  • 160 x 120 thermal pixel resolution
  • Low operating power – 140 mW typical and 650 mW during shutter event
  • Small 11.8 x 12.7 x 7.2 mm package

ACCEPTABLE PERFORMANCE AT DISCOUNTED PRICE

Affordable, non-radiometric thermal imagery and data.

  • -10 °C to 350 °C scene dynamic range
  • Thermal sensitivity <75 mK
  • ≤3% inoperable pixels

BUILD INNOVATIVE THERMAL MONITORING SOLUTIONS

Build innovative thermal monitoring solutions appropriate for heat, security, and comfort monitoring applications.

  • Home and building automation
  • Heat and occupancy sensing
  • Security and location monitoring
     


Important Information

  • All international customers that are ordering any Thermal Imaging Camera will be required to fill out an End Use Statement document before shipment. Once you place your order we will email you the documents.
  • We can only ship this product with a Lepton to North America, Australia, United Kingdom, and the European Union Countries. Any orders for this product with a Lepton placed in a country other than those will be canceled and refunded. We are sorry for the inconvenience.
  • Number of non-defective pixels shall be >97% Adjacent clusters, rows, columns may contain defective pixels that are not factory corrected and unable to be corrected. 3% of operability failures allowed. Temperature compensation Automatic. Output image independent of camera temperature.
  • Lepton FS units are not guaranteed against any radiometric accuracy and users whom wish to use Lepton FS products for radiometric applications do so at their own risk. Teledyne FLIR and GroupGets will not support questions pertaining to calibrating Lepton FS units.

Product Specifications

Overview

  • Sensor technology
    • Uncooled VOx microbolometer
  • Spectral range
    • Longwave infrared, 8 μm to 14 μm
  • Array format
    • 160 x 120, progressive scan
  • Pixel size
    • 12 μm
  • Effective frame rate 8.7 Hz (commercial application exportable)
  • Thermal sensitivity
    • <75mK NEdt
  • Operability
    • Number of non-defective pixels shall be >97% Adjacent clusters, rows, columns may contain defective pixels that are not factory corrected and unable to be corrected. 3% of operability failures allowed. Temperature compensation Automatic. Output image independent of camera temperature.
  • Non-Radiometric Performance
    • While some of the Lepton FS units may output radiometric values per pixel, the Lepton FS units are not guaranteed against any radiometric accuracy and users whom wish to use Lepton FS products for radiometric applications do so at their own risk. Teledyne FLIR and GroupGets will not support questions pertaining to calibrating Lepton FS units.
  • Non-uniformity corrections
    • Integral Shutter
  • Scene dynamic range
    • High Gain Mode: -10 to 140 degrees C typical
    • Low Gain Mode: -10 to 350 degrees C typical
  • Image optimization
    • Factory configured and fully automated
  • FOV - horizontal
    • 57°
  • FOV - diagonal
    • 71°
  • Lens Type
    • f/1.1
  • Output format
    • User-selectable 14-bit, 8-bit (AGC applied), or 24-bit RGB (AGC and colorization applied)
  • Solar protection
    • Integral

Electrical

  • Input clock
    • 25-MHz nominal, CMOS IO Voltage Levels
  • Video data interface
    • Video over SPI
  • Control port
    • CCI (I2C-like), CMOS IO Voltage Levels
  • Input supply voltage
    • (nominal) 2.8 V, 1.2 V, 2.5 V to 3.1 V IO Power dissipation (Typical, room temp) Nominally 150 mW (operating), 650 mW (during shutter event), 5 mW (standby)

Mechanical

  • Package dimensions without socket (w x l x h)
    • 11.50 x 12.70 x 6.835 mm
  • Weight
    • 0.91 grams

 

Environmental

  • Optimum operating temperature range
    • -10C to +65C
  • Non-operating temperature range
    • -40 C to +80 C
  • Shock
    • 1500 G @ 0.4 ms

Purchase Information

Unit Deliverable

One Lepton FS

Unit Price

$74.99

Availability

Campaign Active, scheduled end date: Mon, 06 Feb 2023 14:35:30 PST

Lead Time

2 Days


Options and Add-Ons

Teledyne FLIR Lepton FS

PureThermal 3

$99.99

PureThermal 3 (PT3) is a hackable thermal webcam for the FLIR Lepton (2.x - 3.x and FS) LWIR camera core. With a USB-C output.


Teledyne FLIR Lepton FS

PureThermal Breakout Board

$34.99

The PureThermal Breakout Board is an easy to interface evaluation board used to quickly evaluate the FLIR Lepton® thermal camera modules. It’s compatible with many low-cost ARM based evaluation boards, in addition it’s easy to connect to pin outs for Arduino or via short jumper wires to Raspberry Pi.


Teledyne FLIR Lepton FS

PureThermal Mini Pro JST

$99.99

PureThermal Mini Pro is a hackable thermal webcam for the FLIR Lepton (2.x - 3.x) LWIR camera core. It can has multiple connection options such as solder straight to the board or a custom cable using the JST-SR port. The PTMini Pro also features four mounting holes, less complex circuitry, and perhaps best of all, USB DFU. This is a development kit ready to be embedded into a production system. 


Teledyne FLIR Lepton FS

Teledyne FLIR Lepton Breakout Board

$54.99

The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like RaspberryPi* or custom hardware. It provides onboard power supplies, generated from 3 – 5.5V, and a master clock. Local power supplies, the master clock, and the power-up sequence components can all be bypassed using a jumper.


Sponsors

Sponsor the great works of our community of developers and conservation technologists who are trying to make a real difference. Contact us at sponsor@groupgets.com for more information about becoming a campaign sponsor. For help or any other questions, please submit a support ticket here.

Help

Do you have questions before you back this campaign? We would love to answer them for you! You can either Contact Us or join in on the discussion.

Approved

We are proud to support Teledyne FLIR Lepton FS in reaching its goal.

Buy now

Trusted

GroupGets is a trusted platform to help companies and makers sell their products in bulk while getting individuals the best prices.

Featured Campaigns

GroupGet

EcoFlow RIVER 2 Bundle

Active

Funded
10%

Target
10

Price
$718.00

Get easy access to power anywhere with this EcoFlow Power Station and Solar Generator group buy!   This Bundle Includes 1 x EcoFlow RIVER 2 2 x 110W Portable Solar P... View Campaign
GroupGet

OrangeCrab r0.2.1 85F - Lattice ECP5 FPGA Development Kit

Active

Funded
120%

Target
5

Price
$159.00

The OrangeCrab is an electronics development board. It is FPGA based featuring an ECP5 from Lattice. The board follows the slim feather board specification from Adafruit. ... View Campaign
GroupGet

Naadi Doota - WiFi +BLE Pulse Oximeter and Heart rate s...

Active

Funded
0%

Target
100

Price
$49.99

IoT vital parameter platform nicknamed "Naadi Doota",integrated  board SPO2-Heart rate sensor + ESP32 available for all IoT makers and manufacturing communities. Features... View Campaign